Machine à souder laser à fibre QCW (Quasi-Continuous Wave / CW Mode) - Série GST sur mesure
Présentation des caractéristiques de l'équipement
Le Greenstone GST Series QCW Fiber Laser Welding Machine is a high-efficiency quasi-continuous wave (QCW) fiber laser system designed for precision welding where strong peak power and stable energy output are required. Built as a compact, low-maintenance alternative to traditional lamp-pumped YAG solutions, the GST QCW platform supports CW/QCW operating modes to cover spot welding, seam welding, micro-welding, drilling, and fine cutting tasks in production. With stable power delivery across a wide dynamic range and flexible control interfaces, it is ideal for manufacturers seeking higher yield, better consistency, and lower total operating cost.
échantillons traités
QCW High Peak Power for Strong Penetration: Soutien up to 1500W / 3000W peak power for fast, clean weld formation and improved processing capability on demanding joints.
CW + QCW Dual Mode Flexibility: One machine covers both continuous and quasi-continuous applications, improving equipment utilization for multi-process factories.
High Electro-Optical Efficiency & Cost Saving: More efficient energy conversion (claimed >30%) helps reduce electricity consumption and operating cost.
Stable Energy & Power Output: Consistent pulse power/energy within the laser power dynamic range improves weld repeatability and reduces scrap.
Compact, Industrial Design: Space-saving footprint and robust integration for workshop environments.
Low Maintenance, Long Service Life: Designed for reduced consumables and minimal maintenance during normal service life.
Industrial Connectivity: Soutien analog control + RS-232 + RJ45 network, making it easier to integrate into automation lines, PLC/SCADA, or MES-linked production.
| Article | GST-QCW-150/1500 | GST-QCW-300/3000 |
|---|---|---|
| Operating Mode | CW / QCW (Quasi-Continuous) | CW / QCW (Quasi-Continuous) |
| Longueur d'onde centrale | 1080 ± 2 nm | 1080 ± 2 nm |
| Spectral Bandwidth | < 3 nm | < 3 nm |
| Rated Average Power (CW) | 250 W | 500 W |
| Rated Average Power (QCW) | 150 W | 300 W |
| Max Peak Power | 1500 W | 3000 W |
| Max Pulse Energy | 15 J | 30 J |
| Plage de réglage de la puissance | 5–100% | 5–100% |
| Power Stability | ± 2% | ± 2% |
| Modulation Frequency | 0–5 kHz | 0–5 kHz |
| Pulse Width | 0.05–50 ms | 0.05–50 ms |
| Beam Quality (M²) | < 1.2 | < 1.3 |
| Power Consumption | < 600 W (QCW) / < 900 W (CW) | < 1200 W (QCW) / < 2000 W (CW) |
| Control / Interfaces | Analog / RS-232 / RJ45 | Analog / RS-232 / RJ45 |
| Applications typiques | Spot welding, seam welding, micro-welding, drilling, cutting | Spot welding, seam welding, micro-welding, drilling, cutting |
Produits connexes
Maîtriser les technologies de base de la fabrication additive métallique haute performance et du traitement de surface
