Prezentace charakteristik zařízení
Ten/Ta/To Greenstone GST Series QCW Fiber Laser Welding Machine je vysoce účinný quasi-continuous wave (QCW) fiber laser system designed for precision welding where strong peak power and stable energy output are required. Built as a compact, low-maintenance alternative to traditional lamp-pumped YAG solutions, the GST QCW platform supports CW/QCW operating modes to cover spot welding, seam welding, micro-welding, drilling, and fine cutting tasks in production. With stable power delivery across a wide dynamic range and flexible control interfaces, it is ideal for manufacturers seeking higher yield, better consistency, and lower total operating cost.
zpracované vzorky
QCW High Peak Power for Strong Penetration: Podporuje up to 1500W / 3000W peak power for fast, clean weld formation and improved processing capability on demanding joints.
CW + QCW Dual Mode Flexibility: One machine covers both continuous and quasi-continuous applications, improving equipment utilization for multi-process factories.
High Electro-Optical Efficiency & Cost Saving: More efficient energy conversion (claimed >30%) helps reduce electricity consumption and operating cost.
Stable Energy & Power Output: Consistent pulse power/energy within the laser power dynamic range improves weld repeatability and reduces scrap.
Compact, Industrial Design: Space-saving footprint and robust integration for workshop environments.
Low Maintenance, Long Service Life: Designed for reduced consumables and minimal maintenance during normal service life.
Industrial Connectivity: Podporuje analog control + RS-232 + RJ45 network, making it easier to integrate into automation lines, PLC/SCADA, or MES-linked production.
| Položka | GST-QCW-150/1500 | GST-QCW-300/3000 |
|---|---|---|
| Provozní režim | CW / QCW (Quasi-Continuous) | CW / QCW (Quasi-Continuous) |
| Střední vlnová délka | 1080 ± 2 nm | 1080 ± 2 nm |
| Spectral Bandwidth | < 3 nm | < 3 nm |
| Rated Average Power (CW) | 250 W | 500 W |
| Rated Average Power (QCW) | 150 W | 300 W |
| Max Peak Power | 1500 W | 3000 W |
| Max Pulse Energy | 15 J | 30 J |
| Rozsah nastavení výkonu | 5–100% | 5–100% |
| Stabilita napájení | ± 2% | ± 2% |
| Modulation Frequency | 0–5 kHz | 0–5 kHz |
| Šířka impulzu | 0.05–50 ms | 0.05–50 ms |
| Beam Quality (M²) | < 1.2 | < 1.3 |
| Power Consumption | < 600 W (QCW) / < 900 W (CW) | < 1200 W (QCW) / < 2000 W (CW) |
| Control / Interfaces | Analog / RS-232 / RJ45 | Analog / RS-232 / RJ45 |
| Typické aplikace | Spot welding, seam welding, micro-welding, drilling, cutting | Spot welding, seam welding, micro-welding, drilling, cutting |
Související produkty
Zvládnutí klíčových technologií ve vysoce výkonné aditivní výrobě kovů a povrchových úpravách
