Zařízení pro vysokorychlostní mikroopracování (laserové vrtání) GSTSDrill 100H/200L
Prezentace charakteristik zařízení
The equipment uses high-power QCW quasi-continuous fiber laser as the light source, equipped with a six-axis and five-axis linkage motion control system, and realizes circular hole, blade-shaped hole, and complex surface trajectory cutting through adaptive positioning technology and real-time precise control technology of laser parameters. This equipment is mainly used for efficient cutting and hole-making applications of sheet metal and forging parts in two-engine power and aerospace power, such as blade-shaped hole cutting of compressor stators and guide vanes, and film hole punching and trimming applications of flame tubes with or without coatings.
- A variety of machine tool structures are available to meet the needs of different workpiece sizes;
- Six-axis and five-axis linkage, three-dimensional laser drilling;
- Laser impact drilling and nesting drilling;
- Optical double-swing axis laser processing head, with good processing accessibility;
- Can realize laser processing focus correction of complex morphology workpieces;
- Thin-wall rotary parts follow-up adaptive positioning function;
- Coaxial vision system based on machine vision, with processing process monitoring and auxiliary positioning functions;
- Workpiece model feature extraction, rapid processing and production of NC programs;
- Rotary body flying punching function, greatly improving processing efficiency.
| Parametr | Hodnota |
| X/Y/Z Axis Travel (mm) | 1000×750×1000 (optional) |
| B/C Axis Travel (°) | ±135/n×360 |
| C1 Axis Travel (°) | n×360 |
| X/Y/Z Axis Positioning Accuracy (°) | 0.02 |
| B/C Axis Positioning Accuracy (″) | 20 |
| C1 Axis Positioning Accuracy (″) | 15 |
| X/Y/Z Axis Repeatability (mm) | 0.01 |
| B/C Axis Repeatability (″) | 10 |
| C1 Axis Repeatability (″) | 6 |
| Laser Power (w) | 1500 (optional) |
| Equipment Weight (t) | 10 |
| Equipment Dimensions (mm) (W×D×H) | 6340×5540×3900 (optional) |
| Workpiece Size (mm) | Φ1200×800 (Max Φ1400×800) (optional) |
High-speed micro-hole processing solution overview: Aiming at the efficient manufacturing needs of dense groups of holes in large-sized complex parts in the fields of aerospace, automobile, etc., we focus on high-efficiency and high-quality laser processing technology, and provide customers with high-end fine processing services and a full set of product solutions including millisecond laser, nanosecond laser, long and short pulse composite laser.
| Obrázky výsledků | popis |
 | High-efficiency machining of special-shaped holes in high-temperature alloys. The maximum processing size is ≤Φ1000mm×600mm. The remelting layer thickness is controlled within ≤0.03mm, the hole diameter accuracy reaches ≤±0.02mm, and the cutting speed can reach ≥200mm/min. |
 | Massive group hole machining of special-shaped holes in coated combustion chambers. The maximum processing size is ≤Φ1000mm×600mm. The hole-making accuracy reaches ±0.03mm, the recast layer thickness is controlled within ≤0.05mm, and the single-hole processing time is ≤15 seconds. |
 | Mass hole machining of coated ceramic matrix composite combustion chambers with a machining accuracy of ±0.03mm. The ceramic fibers remain unbroken and non-oxidized, with no surface ablation. |
Doporučená pokročilá výrobní řešení
Prozkoumejte související portfolio vysoce výkonných průmyslových zařízení Greenstone, která jsou navržena tak, aby splňovala vaše výrobní cíle v oblasti laserového plátování, aditivní výroby DED, laserového čištění, povrchového inženýrství, přesné automatizace a pokročilého zpracování materiálů. Každé řešení je strategicky navrženo tak, aby rozšiřovalo výrobní možnosti, zvyšovalo efektivitu procesů a podporovalo škálovatelné průmyslové inovace.
Od modulárních laserových systémů až po plně integrované inteligentní výrobní platformy - společnost Greenstone poskytuje zákazníkům propojené technologie, které zajišťují větší flexibilitu, přesnost a provozní dokonalost pro moderní globální výrobní prostředí.
