Pulsed Solid-State Cultural Heritage Laser Cleaning System (1J / 1000mJ, 532nm & 1064nm, Water-Cooled, Light-Guide Arm) for Metal Artifact Rust & Oil Removal - DED Metal 3D Printing Equipment Manufacturer | Laser Cladding, Hardening, Welding, Cleaning & Cold Spray Systems

Hệ thống làm sạch di sản văn hóa bằng laser trạng thái rắn xung (1J / 1000mJ, 532nm & 1064nm, làm mát bằng nước, cánh tay dẫn sáng) để loại bỏ rỉ sét và dầu mỡ trên các hiện vật kim loại

Giới thiệu các đặc tính của thiết bị

Cái Greenstone-Tech GST-Series Cultural Relics Laser Cleaner là một pulsed solid-state laser cleaning system được thiết kế dành cho heritage conservation and metal artifact restoration. Using a high single-pulse energy up to 1 J (1000 mJ) và một hệ thống điều khiển thông minh, it removes surface contaminants such as oil stains and rust from cultural relic metal surfaces with minimal thermal impact và non-contact precision.

With a beam homogenization design, the system delivers a more uniform spot for consistent cleaning results and stable long-duration operation. It also supports dual wavelengths (532 nm & 1064 nm) and can be configured with an optional frequency-conversion module to match different restoration needs.

mẫu đã qua xử lý

Designed for heritage conservation: Suitable for removing oil, oxidation, and rust vào metal cultural relic surfaces while helping reduce the risk of substrate damage.
High single-pulse energy (up to 1 J): Strong cleaning capability for stubborn contamination layers.
Dual-wavelength flexibility (532 nm & 1064 nm): Broader adaptability across different contaminants and surface conditions; frequency conversion module optional.
Uniform beam output: Built-in beam homogenization helps improve spot consistency and cleaning uniformity.
Stable long-term operation: Power instability < 2%, supporting consistent results over time.
Wide process control: Energy adjustable from 10% to 100%, enabling fine control for delicate restoration tasks.
Articulated light-guide arm output: Uses a light-guide arm for controlled delivery during cleaning operations.
Water-cooled design: Supports stable performance during extended duty cycles.

Mặt hàng	Thông số kỹ thuật
Mẫu	Greenstone-Tech GST- (Cultural Relics Laser Cleaner, GST-Series)
Năng lượng xung đơn	1000 mJ (1 J)
Bước sóng laser	532 nm & 1064 nm
Laser Repetition Rate	1–10 Hz
Energy Adjustment Range	10–100%
Kích thước điểm	1–10 mm
Cleaning Output Method	Articulated light-guide arm
Light-Guide Arm Length	1 m
Phương pháp làm mát	Làm mát bằng nước
Loại laser	Pulsed solid-state laser
Công suất tiêu thụ định mức	2 kW
Supply Voltage	220 V
Nhiệt độ hoạt động	10–40°C
Trọng lượng tịnh	118 kg
Môi trường cài đặt	Humidity 10–85% RH (no condensation); no explosive/corrosive gases at installation site
Working Environment Note	Performance may be affected by noise, ventilation, dust, and similar factors
Output Stability	Power instability < 2%
Optional Configuration	Frequency-conversion module (supports additional wavelength options such as 532 nm / 1064 nm)