Metal Eserlerdeki Pas ve Yağın Giderilmesi için Darbeli Katı Hal Kültürel Miras Lazer Temizleme Sistemi (1J / 1000mJ, 532nm & 1064nm, Su Soğutmalı, Işık Kılavuzlu Kol)
Ekipmanın özelliklerinin sunumu
O Greenstone-Tech GST-Series Cultural Relics Laser Cleaner bir pulsed solid-state laser cleaning system için tasarlanmıştır heritage conservation and metal artifact restoration. Using a high single-pulse energy up to 1 J (1000 mJ) and an intelligent control system, it removes surface contaminants such as oil stains and rust from cultural relic metal surfaces with minimum termal etki Ve non-contact precision.
With a beam homogenization design, the system delivers a more uniform spot for consistent cleaning results and stable long-duration operation. It also supports dual wavelengths (532 nm & 1064 nm) and can be configured with an optional frequency-conversion module to match different restoration needs.
işlenmiş örnekler
Designed for heritage conservation: Suitable for removing oil, oxidation, and rust üzerinde metal cultural relic surfaces while helping reduce the risk of substrate damage.
High single-pulse energy (up to 1 J): Strong cleaning capability for stubborn contamination layers.
Dual-wavelength flexibility (532 nm & 1064 nm): Broader adaptability across different contaminants and surface conditions; frequency conversion module optional.
Uniform beam output: Built-in beam homogenization helps improve spot consistency and cleaning uniformity.
Stable long-term operation: Power instability < 2%, supporting consistent results over time.
Wide process control: Energy adjustable from 10% to 100%, enabling fine control for delicate restoration tasks.
Articulated light-guide arm output: Uses a light-guide arm for controlled delivery during cleaning operations.
Su soğutmalı tasarım: Supports stable performance during extended duty cycles.
| Öğe | Özellikler |
|---|---|
| Model | Greenstone-Tech GST- (Cultural Relics Laser Cleaner, GST-Series) |
| Tek Darbe Enerjisi | 1000 mJ (1 J) |
| Lazer Dalga Boyu | 532 nm & 1064 nm |
| Laser Repetition Rate | 1–10 Hz |
| Energy Adjustment Range | 10-100% |
| Spot Size | 1–10 mm |
| Cleaning Output Method | Articulated light-guide arm |
| Light-Guide Arm Length | 1 m |
| Soğutma Yöntemi | Su Soğutma |
| Lazer Tipi | Pulsed solid-state laser |
| Nominal Güç Tüketimi | 2 kW |
| Supply Voltage | 220 V |
| Çalışma Sıcaklığı | 10-40°C |
| Net Ağırlık | 118 kg |
| Kurulum Ortamı | Humidity 10–85% RH (no condensation); no explosive/corrosive gases at installation site |
| Working Environment Note | Performance may be affected by noise, ventilation, dust, and similar factors |
| Output Stability | Power instability < 2% |
| Optional Configuration | Frequency-conversion module (supports additional wavelength options such as 532 nm / 1064 nm) |
İlgili ürünler
Yüksek Performanslı Metal Katmanlı Üretim ve Yüzey İşleminde Temel Teknolojilere Hakim Olmak
