Introduction

In an injection molding factory, the screw is the true “core component” of the injection molding machine. From raw material melting and plasticizing to stable extrusion and molding, the entire process depends on the precise and continuous operation of the screw. However, in real production environments, screw damage is extremely common.

Foreign impurities in raw materials, long-term mechanical wear, or exposure to corrosive plastics can all cause surface scratches, wear, and localized damage. Once the screw is damaged, problems such as uneven plasticizing, bubbles, short shots, and even material leakage may occur. In severe cases, production must stop immediately.

Traditionally, many factories believe that a damaged screw must be completely replaced. But today, laser cladding repair offers a far more cost-effective and efficient solution.

Why Replacing an Injection Screw Is Not Always the Best Option

Replacing a new injection molding screw often comes with multiple challenges:

High purchase cost

Long delivery time from manufacturers

Forced production shutdown

Risk of delayed order delivery

For factories under tight production schedules, even a few days of downtime can result in serious losses.

This is why more manufacturers are turning to technologie de revêtement par laser as an alternative to full replacement.

How Laser Cladding Solves Injection Screw Scratching Problems

Revêtement laser is a precision surface repair and strengthening technology. Instead of replacing the entire screw, laser cladding repair focuses only on the damaged area, restoring the surface while preserving the original screw structure.

L'avantage principal de rechargement laser lies in its accuracy and metallurgical bonding. During the procédé de rechargement laser, a high-energy laser beam melts alloy powder and the substrate surface simultaneously, forming a dense, wear-resistant cladding layer that bonds perfectly with the base material.

Key Advantages of Laser Cladding for Injection Screws

Precise local repair without changing the screw geometry

Forte liaison métallurgique

Excellent wear resistance and corrosion resistance

Minimal heat-affected zone

Extended service life after laser cladding

Laser Cladding Repair Process for Injection Molding Screws

Before applying rechargement laser, the screw undergoes a detailed inspection to determine:

Scratch location

Depth of damage

Degree of wear or corrosion

The damaged area is then cleaned thoroughly, residual plastic materials are removed, and surface grinding exposes the base material. Based on the working conditions of the screw, suitable matériaux de revêtement par laser are selected.

Au cours de la laser cladding repair, the alloy material is precisely deposited onto the damaged surface. After laser cladding, fine machining and polishing ensure that surface smoothness and dimensional accuracy meet injection molding requirements. The repaired screw can then be reinstalled and put back into production immediately.

Real Case: Laser Cladding Repair in a Zhejiang Injection Molding Factory

A plastic injection factory in Zhejiang faced sudden scratching on a main injection molding machine screw. Product qualification rates dropped sharply, and minor material leakage appeared. The screw supplier recommended full replacement, but the cost was high and delivery would take several days.

To avoid long downtime, the factory chose laser cladding repair.

Results After Laser Cladding

Repair cost significantly lower than new screw replacement

Total repair cycle much shorter than waiting for a new screw

Production resumed quickly without delaying orders

Stable operation after laser cladding

Product quality returned to normal

No further wear or leakage observed

This case clearly demonstrates the value of technologie de revêtement par laser in real industrial production.

Laser Cladding vs. Screw Replacement: Cost and Efficiency Comparison

For scratches, localized wear, and mild corrosion, rechargement laser is often the smarter choice.

Why Laser Cladding Is Ideal for Injection Molding Factories

For plastic manufacturing enterprises, not every screw problem requires replacement. Revêtement laser provides a reliable solution for:

Accidental scratches

Localized wear

Surface corrosion

Performance restoration

By choosing laser cladding repair, factories can:

Reduce maintenance costs

Shorten downtime

Improve equipment utilization

Support sustainable manufacturing

Conclusion

A scratched injection molding screw does not necessarily need to be replaced. With advanced technologie de revêtement par laser, damaged screws can be accurately repaired, performance fully restored, and service life significantly extended.

Revêtement laser allows factories to spend less, recover faster, and avoid unnecessary production delays. As manufacturing costs continue to rise, laser cladding repair is becoming an essential solution for injection molding equipment maintenance.

If you are facing screw scratching, wear, or corrosion issues and want to know whether rechargement laser is suitable for your equipment, feel free to consult us. We will help analyze your situation and provide practical, cost-effective solutions.