Stellite 6 & Stellite 12 Cobalt Alloy Powder for Laser Cladding, Valve, Oil & Gas and Industrial Wear Protection
Обзор продукта
GREENSTONE Stellite 6 and Stellite 12 cobalt-based alloy powders are high-performance Co-Cr-W alloy materials engineered for laser cladding, Directed Energy Deposition (DED), PTA hardfacing, HVOF thermal spraying, and industrial surface engineering.
Both alloys combine excellent wear resistance, corrosion resistance, high-temperature stability, and metal-to-metal wear performance, making them suitable for demanding components operating under abrasion, erosion, friction, heat, and corrosive environments.
Стеллит 6 provides a balanced combination of hardness, toughness, corrosion resistance, and wear resistance, making it a versatile choice for valve seats, valve components, pump components, shafts, sealing surfaces, and industrial repair applications.
Стеллит 12 has higher carbon and tungsten content and typically provides greater hardness and abrasion resistance than Stellite 6. It is particularly suitable for cutting components, extrusion equipment, industrial tooling, wear plates, valve components, and other severe-wear applications.
GREENSTONE supplies spherical cobalt alloy powders with particle size distributions optimized for different powder-based manufacturing and coating processes.
High Wear and Erosion Resistance
The Co-Cr-W alloy system forms a wear-resistant cobalt matrix reinforced by chromium- and tungsten-rich carbides. This microstructure provides excellent resistance to abrasive wear, adhesive wear, erosion, galling, and metal-to-metal friction.
Stellite 12 generally offers higher hardness and abrasion resistance, while Stellite 6 provides a more balanced combination of wear resistance, toughness, corrosion resistance, and machinability.
Отличные характеристики при высоких температурах
The cobalt-based matrix maintains useful mechanical properties at elevated temperatures and provides good resistance to thermal degradation. This makes Stellite alloy powders suitable for components exposed to repeated heating, friction, and demanding industrial operating conditions.
Стойкость к коррозии и окислению
High chromium content provides strong resistance to oxidation and many corrosive industrial environments. Stellite 6 and Stellite 12 coatings are therefore widely used in valves, pumps, petrochemical equipment, power-generation components, marine equipment, and process-industry machinery.
Optimized for Laser Cladding and DED
GREENSTONE cobalt alloy powders can be supplied with controlled particle morphology and particle-size distribution to provide:
- Stable powder feeding and good flowability
- Consistent deposition during laser cladding and DED
- Dense deposited layers with low porosity under optimized processing conditions
- Strong metallurgical bonding with suitable substrates
- Controlled dilution and uniform coating performance
- Custom particle-size distributions for different deposition processes
Stellite 6 – Balanced General-Purpose Wear Protection
Stellite 6 is commonly selected where the component requires a balance between hardness, toughness, corrosion resistance, erosion resistance, and thermal stability.
Typical applications include valve seats and gates, pump components, sealing surfaces, shafts, bushings, bearing surfaces, oil & gas components, and industrial component repair.
Stellite 12 – Higher Hardness for Severe Wear
Stellite 12 contains higher levels of carbon and tungsten than Stellite 6, resulting in increased carbide formation and higher hardness. It is preferred for applications dominated by abrasion, sliding wear, erosion, and severe surface degradation.
Typical applications include cutting tools, extrusion screws, industrial knives, dies, wear plates, valve components, and heavy-duty wear surfaces.
Multiple Powder Processing Options
Depending on the required application and equipment, GREENSTONE can provide particle-size distributions suitable for laser cladding, DED additive manufacturing, PTA hardfacing, HVOF, and thermal spraying.
| Параметр | Стеллит 6 | Стеллит 12 |
|---|---|---|
| Тип сплава | Cobalt-Chromium-Tungsten Alloy | Cobalt-Chromium-Tungsten Alloy |
| Базовый элемент | Co (Balance) | Co (Balance) |
| Cr | Approx. 27–32 wt.% | Approx. 27–32 wt.% |
| W | Approx. 4–6 wt.% | Approx. 7–9.5 wt.% |
| C | Approx. 0.9–1.4 wt.% | Approx. 1.4–1.9 wt.% |
| Ni | Typically ≤3 wt.% | Typically ≤3 wt.% |
| Fe | Typically ≤3 wt.% | Typically ≤3 wt.% |
| Si | Typically ≤2 wt.% | Typically ≤2 wt.% |
| Mn | Typically ≤2 wt.% | Typically ≤2 wt.% |
| Типичная твердость | Approx. 36–45 HRC* | Approx. 45–51 HRC* |
| Морфология порошка | Spherical / Near-Spherical | Spherical / Near-Spherical |
| Typical Particle Size – Laser Cladding / DED | 45–105 μm / customizable | 45–105 μm / customizable |
| Typical Particle Size – PTA | 53–150 μm / customizable | 53–150 μm / customizable |
| Other Particle Sizes | Доступен для запроса | Доступен для запроса |
| Primary Performance | Balanced wear, corrosion and heat resistance | Higher hardness and severe wear resistance |
| Износостойкость | Прекрасно | Очень высоко |
| Коррозионная стойкость | Прекрасно | Хорошо |
| Высокотемпературные характеристики | Прекрасно | Прекрасно |
| Лазерная оболочка | Подходящий | Подходящий |
| DED Additive Manufacturing | Подходящий | Подходящий |
| PTA Hardfacing | Подходящий | Подходящий |
| HVOF / Thermal Spray | Available with suitable powder grade | Available with suitable powder grade |
| Типичные отрасли | Oil & Gas, Power, Marine, Chemical, Machinery | Mining, Tooling, Oil & Gas, Machinery, Heavy Industry |
| Типичные компоненты | Valves, Pumps, Shafts, Seats, Sealing Surfaces | Cutting Tools, Screws, Dies, Wear Plates, Valves |
*Actual hardness depends on powder chemistry, substrate material, dilution, deposition process, heat input, cooling conditions, and post-processing.
Chemical composition, particle size distribution, morphology, flowability and other powder specifications can be customized according to the deposition process and application requirements. Final specifications are subject to the material certificate supplied with each batch.
Рекомендуемые передовые решения для производства
Ознакомьтесь с портфолио высокопроизводительного промышленного оборудования Greenstone, разработанного для решения ваших производственных задач в таких областях, как лазерная наплавка, аддитивное производство DED, лазерная очистка, обработка поверхностей, прецизионная автоматизация и передовая обработка материалов. Каждое решение стратегически разработано для расширения производственных возможностей, повышения эффективности процессов и поддержки масштабируемых промышленных инноваций.
От модульных лазерных систем до полностью интегрированных интеллектуальных производственных платформ, компания Greenstone предоставляет клиентам взаимосвязанные технологии, обеспечивающие большую гибкость, точность и операционную эффективность в современных глобальных производственных средах.
