레이저 클래딩 is an advanced manufacturing technology that has become a core method for surface repair and additive manufacturing across industries like aerospace, energy equipment, and transportation. By utilizing high-energy laser beams and metal powders, 레이저 클래딩 creates metallurgically bonded, dense coatings on the surface of base materials. This article provides a comprehensive analysis of the technology’s principles, advantages, and key applications.

1. Technology Principles and Core Advantages

Principles of Laser Cladding:

In 레이저 클래딩, a high-energy density laser beam (ranging from 10³ to 10⁶ W/cm²) is used to scan the surface of the base material. Alloy powders are either pre-placed or delivered simultaneously with the laser, melting and forming a micron-thin molten pool (approximately 0.1–2 mm thick). After the laser moves away, the molten pool cools rapidly (cooling rate of 10³-10⁶ K/s) and metallurgically bonds with the base material to form a gradient coating. The key to this process is managing the laser energy-material interaction during the dynamic solidification process to control the heat input and compositional uniformity of the molten pool.

Core Advantages of Laser Cladding:

·Low Dilution Rate: The dilution zone between the cladding layer and base material makes up less than 5% of the total thickness (much lower than traditional welding, where the dilution rate is 15%-30%), which helps preserve the high-performance alloy design.

·Minimal Thermal Damage: With a small focused heating area, the overall temperature rise of the base material is kept under 100°C, preventing deformation and grain coarsening, making it ideal for precision component repairs.

·Wide Material Compatibility: 레이저 클래딩 can be performed with nickel-based, cobalt-based, and ceramic-reinforced composite powders, addressing diverse requirements such as wear resistance (e.g., WC particle-reinforced) and corrosion resistance (e.g., Ni-Cr-Mo systems).

·High Efficiency and Control: Single-pass cladding rates can reach 0.5-2 m/min. Combined with automation, this allows for large-scale production.

2. Key Parameters, Influencing Mechanisms, and Technology Selection

Core Parameters of Laser Cladding:

The four critical parameters for determining the quality of 레이저 클래딩 are laser power (P, kW), scanning speed (v, mm/s), powder feeding rate (f, g/min), and spot diameter (d, mm). These parameters must balance the energy input for cladding, as too little energy leads to insufficient bonding, while too much energy can cause porosity or excessive melting.

·Laser Power (P): Affects the depth of the cladding layer and dilution rate. Excessively high power can overheat the base material, while too low power may fail to melt the powder effectively.

·Scanning Speed (V): Controls the heat input, and its speed must be balanced with the laser power to avoid uneven cladding or excessive heat-affected zones.

·Spot Diameter (D): Smaller spot sizes (e.g., 0.5 mm) enhance coating quality, while larger spots (e.g., 2 mm) are more suitable for large-scale repairs.

·Powder Feeding Rate (F): Matches the laser power to maintain molten pool stability. Insufficient feeding can increase porosity, while excessive feeding may reduce powder utilization.

Influencing Mechanisms:

·Dilution Rate: The dilution rate δ ≈ (f·t)/(P·v) directly affects the purity of the cladding layer.

·Residual Stress: The cooling rate is directly related to the residual stress. Higher scanning speeds (greater than 8 mm/s) can reduce tensile stresses and minimize cracking risks.

·Layer Thickness: The thickness of a single pass should be between 0.2 mm to 1.5 mm, and it must match the coefficient of thermal expansion of the base material to avoid stress concentration at the interface.

Technology Selection Recommendations:

For 45 steel or stainless steel substrates, nickel-based (Ni60) or iron-based (Fe45) alloys are recommended for a balance between cost and wear resistance.

For high-temperature applications, such as turbine blades, cobalt-based alloys (e.g., Stellite 6) are preferable due to their superior high-temperature strength and oxidation resistance.

For complex surfaces, a galvanometer scanning system should be used to ensure precise spot trajectory accuracy (±0.05 mm).

For large components (e.g., rolls), coaxial powder feeding is advised to prevent energy decay at the edges, which can occur with off-axis powder feeding.

3. Complete Process Flow

Pre-Processing Stage:

·Surface Cleaning: Methods like sandblasting (SA2.5 grade) or plasma cleaning are used to remove oxidation and oil contaminants. Poor pre-treatment quality can lead to porosity in the cladding layer.

·Defect Detection: Penetrant testing or magnetic particle inspection can eliminate cracks or pores in the base material, preventing cladding failure.

·Pre-Heating: For high-carbon steel substrates, pre-heating to 150-200°C can reduce thermal stresses. Experiments show that pre-heating reduces crack incidence from 18% to 3%.

Cladding Stage:

·Powder Delivery: A synchronous powder feeding method (e.g., annular powder feeding) precisely controls the powder flow, reducing porosity and making it suitable for components with complex geometries.

·Parameter Optimization: For example, when cladding with nickel-based alloys, parameters like laser power (1-3 kW), scanning speed (5-20 mm/s), and powder feeding rate (5-20 g/min) are adjusted to minimize residual stress and optimize the cladding process.

Post-Processing Stage:

Controlled Cooling: After cladding, components should be cooled in an inert gas (Ar) atmosphere to avoid crack formation, especially for high-carbon base materials.

Heat Treatment: For high-stress components, stress-relieving annealing at 550°C can eliminate residual stresses.

Mechanical Processing: Dimensions are corrected by turning or grinding (tolerance ±0.02 mm), and the surface is polished to achieve a roughness of Ra ≤ 1 μm.

Performance Testing: Hardness gradient testing (HV 800-1200 on the surface), XRD analysis for phase identification, and ultrasonic testing for internal defects ensure compliance with national standards (GB/T 29713-2013).

레이저 클래딩 technology, through precise control of processing parameters, enables the cost-effective production of high-performance coatings. It is widely applied across industries such as aerospace, automotive manufacturing, and mining equipment, driving the transformation of industrial surface enhancement from “experience-based repair” to “scientific design.”