Corrosion-Resistant High-Strength Iron-Based Alloy Powder for Metal 3D Printing, SLM, DMLS and Additive Manufacturing
Vara Yfirlit
Corrosion-Resistant High-Strength Iron-Based Alloy Powder is engineered for metal additive manufacturing and advanced industrial applications requiring a combination of high strength, corrosion resistance, thermal stability, and reliable powder processing performance.
Framleitt með því að nota háþróaða Vacuum Induction Melting Gas Atomization (VIGA) or Rafskautsframkalla bræðslugas atomization (EIGA) technology, the powder features high sphericity, controlled particle size distribution, low oxygen content, and excellent flowability, supporting stable powder spreading and consistent layer formation during metal additive manufacturing.
The material is suitable for Selective Laser Melting (SLM), Direct Metal Laser Sintering (DMLS), Electron Beam Melting (EBM) and other compatible powder-based metal additive manufacturing processes. It can be used for high-strength structural components, complex precision parts, corrosion-resistant components, tooling, molds, energy equipment, and other demanding industrial applications.
With optimized powder morphology and controlled material quality, the alloy powder provides a reliable material solution from prototype development to industrial metal additive manufacturing.
High Strength and Mechanical Performance
After appropriate processing and heat treatment, manufactured components can achieve high hardness and tensile strength while maintaining the toughness required for demanding industrial applications. According to the supplied product information, typical hardness can reach approximately HRC 35–50, with tensile strength exceeding 1000 MPa, depending on the final processing and heat-treatment conditions.
Framúrskarandi tæringarþol
The iron-based alloy system is designed to provide strong corrosion resistance for components operating in demanding industrial environments. This makes the powder suitable for applications involving energy equipment, industrial tooling, molds, mechanical components, and other parts requiring both mechanical strength and environmental resistance.
Optimized for Metal Additive Manufacturing
High powder sphericity and controlled particle size distribution contribute to:
- Excellent powder flowability
- Uniform powder spreading
- Stable layer formation
- Consistent melting behavior
- Reduced risk of powder-related printing defects
- Improved repeatability during additive manufacturing
A typical particle size range of 15–53μm is suitable for common laser powder bed fusion applications, subject to the requirements of the specific machine and process.
VIGA / EIGA Gas-Atomized Powder
Ítarlegri VIGA and EIGA gas atomization technologies can be used to achieve highly spherical particles, controlled chemical composition, low impurity levels, and consistent batch quality.
The supplied technical information specifies oxygen content below 0.1% as a typical target.
Quality Control
Powder quality can be evaluated through internationally recognized testing methods, including:
Chemical Composition Analysis (OES)
Particle Size Distribution – Laser Diffraction
Hall Flow Rate Testing
Bulk Density Testing
Production and quality control can follow applicable metal powder standards such as ASTM F3049, depending on the specific material grade and customer requirements.
Víðtæk iðnaðarforrit
This high-strength corrosion-resistant metal powder can be used for:
Loftrými: Lightweight and high-strength structural components and heat-resistant parts.
Orka: Oil and gas components, corrosion-resistant parts and industrial energy equipment.
Tooling & Mold Manufacturing: Injection molds, die-casting molds, precision tooling and repair applications requiring high hardness and wear resistance.
Industrial Additive Manufacturing: Complex metal components, customized parts, prototypes and low-volume production.
Custom Powder Solutions
Particle size distribution, powder preparation route and material specifications can be selected or customized according to the customer’s additive manufacturing equipment, process requirements and final component performance targets.
| Breytu | Specification |
|---|---|
| Tegund vöru | Corrosion-Resistant High-Strength Iron-Based Alloy Powder |
| Efnisflokkur | Iron-Based Metal Alloy Powder |
| Powder Manufacturing Process | VIGA / EIGA Gas Atomization |
| Powder Formology | Highly Spherical |
| Dæmigerð agnastærð | 15–53μm |
| Súrefnisinnihald | <0.1% |
| Typical Hardness After Processing | HRC 35–50 |
| Dæmigerður togstyrkur | > 1000 MPa |
| Aðalferli | SLM / DMLS / EBM / Metal Additive Manufacturing |
| Einkenni dufts | High Sphericity, Good Flowability, Controlled Particle Size Distribution |
| Efnagreining | oes |
| Particle Size Testing | Leysigreining |
| Flæðisprófun | Hall flæðimælir |
| Þéttleikaprófun | Magnþéttleiki |
| Viðmiðunarstaðall | ASTM F3049 |
| Helstu eiginleikar | High Strength, Corrosion Resistance, Thermal Stability |
| Dæmigert Umsóknir | Metal 3D Printing, Industrial Components, Energy Components, Tooling and Mold Manufacturing |
| Sérstilling agnastærðar | Available According to Process Requirements |
Ráðlagðar háþróaðar framleiðslulausnir
Skoðaðu tengda vöruúrval Greenstone af afkastamiklum iðnaðarbúnaði, hannaður til að styðja við framleiðslumarkmið þín, hvort sem um er að ræða leysigeislahúðun, DED viðbótarframleiðslu, leysigeislahreinsun, yfirborðsverkfræði, nákvæma sjálfvirkni og háþróaða efnisvinnslu. Hver lausn er stefnumótandi hönnuð til að auka framleiðslugetu, auka skilvirkni ferla og styðja við stigstærðar iðnaðarnýjungar.
Frá mátbundnum leysikerfum til fullkomlega samþættra snjallra framleiðslupalla býður Greenstone viðskiptavinum upp á samtengda tækni sem skilar meiri sveigjanleika, nákvæmni og rekstrarhæfni fyrir nútíma alþjóðlegt framleiðsluumhverfi.
